Fireplace Contractors Farmers Branch

Fire Place Contractors is a local chimney inspection, repair, and installation business servicing homes in Farmers Branch, Texas and the surrounding areas. Our staff is composed of experts in the industry committed to offerring the most affordable services to it’s customers. 

Annual Chimney Cleaning & Inspection

First, it helps to prevent fires. When ashes and soot build up in a chimney, they can create an ideal environment for a fire to start. This is especially dangerous if the fire is allowed to spread to the roof of the house. In addition to preventing fires, cleaning the chimney also improves indoor air quality. Soot and other pollutants from the fireplace can enter the home through the chimney, causing respiratory problems and aggravating allergies.

By having the chimney cleaned on a regular basis, you can help to improve your family’s health and keep your home safe. And when it comes to cleaning and repairing chimneys in Farmers Branch, Texas, you can count on Fire Place Contractors. We have experienced professionals who can take a look at your chimney and give a comprehensive report on what’s wrong and what should be done to keep the unit working for years.

Farmers Branch Fireplace Install Services

Chimney Sweep Service

At Fire Place Contractors, we use the dual brush method to clean chimneys. This involves sending two brushes down the chimney, one after the other. The first brush loosens up any debris that is clinging to the sides of the chimney. The second brush then sweeps the debris away. This method is effective in removing both large and small pieces of debris. In addition, it helps to reduce the amount of dust that is sent into the air during the cleaning process. As a result, our customers can rest assured that their chimneys will be thoroughly cleaned when they use our services.

Apart from cleaning your chimney, we will also inspect it thoroughly. We use a video camera to inspect chimneys. This allows us to get a close-up view of the inside of the chimney and look for any potential problems. The first thing we do is insert the camera into the chimney. Then, we slowly move the camera around, looking for any cracks or other damage. If we find any damage, we will repair it before continuing with the inspection. Once we have finished inspecting the chimney, we will remove the camera and provide a report.

Farmers Branch Fireplace Repair

Repairing a fireplace can be a daunting task, but with the right tools and knowledge, it can be easily accomplished. Since we have experienced technicians, it doesn’t seem like a tough task for us. The first step is to assess the damage. If the damage is extensive, we will provide a comprehensive report and let you decide when to start the repair. We recommend starting as soon as possible. However, for minor cracks and chips, we usually follow the steps below:

● First, we use a vacuum to remove any dirt or debris from the affected area.
● Next, we take a damp cloth to clean the area and allow it to dry completely.
● Once the area is dry, we apply a generous amount of mortar to the crack or chip using a trowel. We will smoothen the mortar until it is level with the surrounding surface and allow it to dry for 24 hours.
● Finally, we apply a thin layer of grout over the mortar to give the fireplace a finished look.

Turbine Cap Installation

A turbine cap, also known as a chimney turbine, is a type of cap that is placed on top of a chimney. It prevents wind-driven rain and snow from entering the chimney. Turbine caps are also used to help exhaust gases escape from the chimney more efficiently. The blades of the turbine cap rotate in the wind, which creates an updraft that keeps the chimney clear of debris. At Fire Place Contractors, we install turbine caps after assessing your chimney’s condition.

The first step in installing a turbine cap is to measure the chimney. This will ensure that the cap is the proper size and can be securely attached. Next, we clean the chimney so that there is no debris that could impede the installation. Once the chimney is clean, we mark the center of the flue with a pencil. This is the place where the cap will be installed. Next, we drill pilot holes into the chimney at the marked location. We wear safety glasses when drilling. Finally, we use bolts to secure the cap in place. We start by attaching one bolt at the top of the cap, then work our way around, attaching bolts at intervals until the cap is secure. Once all of the bolts are in place, we open the damper and test the turbine to ensure that it is working properly.

Local Fireplace Maintenance and Repairs Farmers Branch

At Fire Place Contractors, we know that your fireplace is more than just a source of heat – it’s an important part of your home. That’s why we offer comprehensive chimney cleaning and repair services to keep your fireplace in top condition. Our team of experienced professionals will thoroughly clean your chimney, removing all the soot and debris that can build up over time. We also offer repair services for any damage that may have occurred, such as cracked bricks or a damaged flue. With our help, you can rest assured that your fireplace will be safe and ready to use all winter long.

Fire Place Contractors provides top-quality chimney cleaning and fireplace repair services in Farmers Branch, Texas. We’re dedicated to ensuring that your home is safe and comfortable, and we offer a variety of services to meet your needs. Contact us today to schedule an appointment!

Call NOW